Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Drag coefficients for noncircular members

Status
Not open for further replies.
jschwan

jschwan

Structural
Joined
Sep 16, 2009
Messages
1
Location
US
Does any one know where the text
"Rules for the design construction and inspection of offshore structures" by Det norske Veritas can be located. This text is referenced in API RP2A 2.3.1.b.7.
 
Sort by date Sort by votes
jschwan,

How about Here?

Critter.gif
JHG
 
Upvote 0 Downvote
If you are looking for drag coefficients, they can easily be found on the internet. They are not specifically a "code" thing, but are a fluid mechanics thing.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

StrEng007
  • Locked
  • Question Question
Concrete edge breakout for multiple anchors in a single row (drag load)
2
Replies
24
Views
6K
icebloom
icebloom
EngDM
  • Locked
  • Question Question
Bracing of wood members
Replies
9
Views
3K
SE2607
SE2607
SeizeTheMoment
  • Question Question
How are truss joist members stress transfered?
Replies
2
Views
2K
HTURKAK
HTURKAK
reverbz
  • Locked
  • Question Question
Wood Drag Details
Replies
16
Views
2K
lexpatrie
lexpatrie
BridgeEngineer21
  • Locked
  • Question Question
AASHTO Limiting Slenderness Ratio for Tension Members
Replies
2
Views
588
centondollar
centondollar

Part and Inventory Search

Sponsor

Back
Top