Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Does your Sun/Unix crash?

  • Thread starter Thread starter bartn
  • Start date Start date
B

bartn

Guest
We are running WF2 with Intralink 3.3 on SunBlade 2000 systems. Our systems crash 1 to 3 times per day on average. Crashes are random but generally seem gaphics related. Also, basic photorender will not work - the display goes black. We have been talking to PTC for months and Sun for a few weeks about this. We have tried several patches and graphics settings but nothing has helped. I would like to know if other people are running WF2 on Sun workstations and if you have any similar graphics or crashing issues?


Solaris 10 1/06 s10s_u1wos_19a SPARC


Type: XVR-500 (Expert3D-Lite compatible)





Bart
 
You must log in or register to reply here.

Similar threads

CAD2015
  • Locked
  • Question Question
3Dconnexion space ball doesn't work.....
Replies
4
Views
3K
3DDave
3DDave
S
ProE Guru's, I need your advice on how to preserve old WF2 files please?
Replies
3
Views
14K
robertib
R
vorst
  • Locked
  • Question Question
Creo 4 crashes when opening a part
Replies
6
Views
1K
dgallup
dgallup
J
Repeat-region relation does not work - ”Constraint has been violated”
Replies
2
Views
4K
Johan W
J
terlit_injineer
  • Locked
  • Question Question
sketcher_snap_sensitivity setting does not work properly
Replies
0
Views
213
terlit_injineer
terlit_injineer

Part and Inventory Search

Sponsor

Back
Top