AirConditioningGuy
Mechanical
Does Autocad run on Vista?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Does Autocad run on Vista?
- Thread starter AirConditioningGuy
- Start date
- Status
Might want to take a peek at this also..
"The fear of the Lord is the beginning of wisdom"
"The fear of the Lord is the beginning of wisdom"
Check out the following thread.
I have been using ACAD2007 and CIVIL3D2007 on my Vista Laptop with no issues so far. I started the above thread when I realized that there were probably many people that would have the same problems I did. I bought my laptop immediately after the Vista launch.
Mark
I have been using ACAD2007 and CIVIL3D2007 on my Vista Laptop with no issues so far. I started the above thread when I realized that there were probably many people that would have the same problems I did. I bought my laptop immediately after the Vista launch.
Mark
Mark,
The same thread I listed above.![[thumbsup]](/data/assets/smilies/thumbsup.gif "[thumbsup] [thumbsup]")
Chris
SolidWorks 07 3.0/PDMWorks 07
AutoCAD 06
ctopher's home (updated 03-26-07)
The same thread I listed above.
Chris
SolidWorks 07 3.0/PDMWorks 07
AutoCAD 06
ctopher's home (updated 03-26-07)
Service Pack 2 for 2007
Lothar
ADT 2004
Lothar
ADT 2004
- Status
