Does Anyone know where I can get detailed Tri-Clamp Dimensions 1

[hankroach]

Does anyone know where I can find detailed dimensional information on Tri-Clover Tri-Clamps? I have a special application where I would like to use a 4" tri-clamp. I have not been able to find anymore that overall clamp dimensions.

Thanks for the help.

 

[oxilume]

Hankroach,

see:

http://www.lcthomsen.com

Ask for Wayne (President).

Todd

http://www.oxilume.com

Todd

http://www.oxilume.com

 

[pipingdesigner]

Hankroach,

Try this link:

http://www.csidesigns.com/PDFs/AlfaLavalFittings.pdf

Regards

Anton

http://www.pipingdesigners.com

 

[hankroach]

Thanks for the help. I have an application where I am constrained to use 3" sch 40 pipe. I must also maintain the nominal 3.068 ID thoughout my system. I do not see any prefabricated quick release flanges for sch 40 pipe that I can procure. Therefore I'm looking for dimensions on existing tri-clamps and flanges so I can design flanges that will work with the tri-clamps. The dimension information I can find on the clamps are restricted to the ID of the clamps. If I could find the internal widths and angles of the tri-clamps I can design a flange system to work with it.

I am not able to use B16.5 flanges at this location.
Thanks.

 

[hankroach]

I found a site with good dimensional information at:

http://www.aalco.co.uk/literature/literature.html#stainless

Look at literature "Hygienic Tubes and Fittings"

CAD download of BS4825, pt 3 files can be found at:

http://www.dpluk.co.uk/cad_files/cad/hygiene_tubes/CLP.DXF

Any other good links I'm not aware of?

Thanks

 

[pipingdesigner]

Hankroach,
Thanks for that, good info.

Regards

Anton

http://www.pipingdesigners.com