Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Do I need to Qualify a new WPS for Welding 1.0 material to .4375?

Status
Not open for further replies.
pmeric

pmeric

Marine/Ocean
Joined
Jun 26, 2010
Messages
1
Location
US
My current WPS is qualified for material thinkness range of .150 to .616. I need to weld a reinforcment plate of 1.0 to 4x3x.4375 angle. Can I do this under my current D3.6M WPS?

 
Sort by date Sort by votes
Check your copy of the welding standard.

The range that you are qualified for will usually differ depending on whether you are depositing fillet welds or groove welds.



Best regards - Al
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

infometrix
  • Locked
  • Question Question
Reducing the thickness by machining to qualify for low thickness pipe WPS
Replies
5
Views
920
infometrix
infometrix
metboss
  • Question Question
Welding Procedure Specification (WPS) for the base metal AISI 8630(weld overlay cladding
Replies
2
Views
567
gtaw
gtaw
Spike2000
  • Question Question
tig welding tubing, fitting face perpendicular to tubing
Replies
14
Views
7K
Tmoose
Tmoose
EngDM
  • Locked
  • Question Question
Welding A1018 HSLAS to A500 Grade C
Replies
3
Views
3K
EngDM
EngDM
mrmalcolm
  • Locked
  • Question Question
Range of filler material for welding procedures qualification in ISO 15614-1
Replies
3
Views
3K
kingnero
kingnero

Part and Inventory Search

Sponsor

Back
Top