citycruiser
Bioengineer
Hi. I generated a mesh of several parts. But all parts are in the same color(cyan) in Abaqus mesh module. My quesiton is how to display different the parts of different colors. Could anyone give some suggestion? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
display colors of different mesh parts 1
- Thread starter citycruiser
- Start date
- Status
-
1
- #2
I can't see it in CAE but if you run the analysis, or just do a simple data check on it, then you can view the mesh in different colours in Viewer under Tools/color code.
Your only option in CAE is to view the mesh of separate instances using the display group manager. At least then you can view each part mesh.
corus
Your only option in CAE is to view the mesh of separate instances using the display group manager. At least then you can view each part mesh.
corus
- Status
Similar threads
- Locked
- Question