Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Display Alarm Message using VB6.0 to SLC5/05

Thread starter kaneko555
Start date Mar 12, 2014

Status: Not open for further replies.

Mar 12, 2014

kaneko555

Mechanical

Anyone have a sample code on how to display a alarm message on the Label or text box using VB6.0.
The VB6.0 HMI is communicating with SLC5/05 thru DDE Link. The Alarm message would appear when an
output or an input fails. The output or an input fails and is registered in a N file.
Thanks in advance.

Kei