Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Displacement up to a specific point.

Status
Not open for further replies.
QuiE

QuiE

Structural
Joined
Jul 29, 2003
Messages
11
Location
NL
I would like to model a displacement up to a specific point.

I’ve modeled a plate witch expands due to a thermal load, starts to displace. I would like to stop this movement at specific point. Is this possible?

Q
 
Sort by date Sort by votes
If I understood your problem correctly, you have to solve in multiple load steps. Create first load step with giving the known displacement to free end and in second load step constraining that end.
Cheers..


Regards,
Yogesh Birari
 
Upvote 0 Downvote
i will trie it thanks
Q
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
M
  • Question Question
spaceclaim to STEP format, Help needed.
Replies
2
Views
20K
mosenansi
M
Marijn G
  • Locked
  • Question Question
.Frictionless spring support for large lateral displacement
Replies
0
Views
522
Marijn G
Marijn G
IJR
  • Locked
  • Question Question
Ansys workbench structural:Two load steps different large displacement settings?
Replies
0
Views
537
IJR
IJR
O
  • Question Question
Simulation of a screw connexion
Replies
1
Views
4K
dgeesaman
dgeesaman

Part and Inventory Search

Sponsor

Back
Top