Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
din standards
- Thread starter jimmyt
- Start date
Maybe you need to change the connector , and use one you can get local.
Sure there is a female NPT or BSP thread on the block.
If the DIN is 18, it mean 18 mm outside diameter.
So you never can get a good fit with a 3/4 outside diameter.
Pardal
Sure there is a female NPT or BSP thread on the block.
If the DIN is 18, it mean 18 mm outside diameter.
So you never can get a good fit with a 3/4 outside diameter.
Pardal
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
