Dimensions on a helix

[jackosieves]

Hi, new here. I was wondering how one goes about putting dimensions on helix in a drawing on SolidWorks? Any help/advice will be greatly appreaciated. Thanks.

Jake

 

[SBaugh]

Why not important the dimensions you placed in the model?

Or if you are talking about a Hole callout use the Annotation icon.

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"

faq731-376

 

[Gupta65]

Import the dimensions as suggested by SBaugh. Generally I will give the Height and Diameter.

Deepak Gupta
SW2009 SP4.1
SW2007 SP5.0
MathCAD 14.0