Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dimensioning to a quadrant in .idw

Status
Not open for further replies.
JoelCool

JoelCool

Mechanical
Joined
Sep 20, 2005
Messages
2
Location
US
Hi all, I'm new.

I've designed an spherical radius into a axially symetric part. I need to dimension the center of my spherical radius in a full section view, but Inventor won't let me pick it. Is there a clean way to do this?

Thanks!
 
Sort by date Sort by votes
Never mind. I drew a construction line in the sketch from the center point to where I wanted to add my dimension.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question Question
TABLE move in Inventor.......
Replies
1
Views
1K
CAD2015
CAD2015
imti7
  • Locked
  • Question Question
How to connect two solid sections tangentially in Inventor?
Replies
0
Views
896
imti7
imti7
CAD2015
  • Locked
  • Question Question
Switching to metric system.........
Replies
0
Views
787
CAD2015
CAD2015
myvice542
  • Locked
  • Question Question
assembly frozen up after sitting for a number of days
Replies
0
Views
820
myvice542
myvice542
MarkCA
  • Locked
  • Question Question
Modifying a Part Description without Up-Revving
Replies
1
Views
861
dgeesaman
dgeesaman

Part and Inventory Search

Sponsor

Back
Top