Dimensioning Hole Wizard Holes in a Drawing

[EngAP]

Hi,

I have never worked out how to automatically dimension holes created using the Hole Wizard in a drawing.

If anyone knows could you help.

Thanks.

 

[AnnaWood]

You are talking about the drawing and not the sketch in the part file?

Read up on Hole Tables in the SW Help.

Cheers,


Anna Wood
SW2008 SP4.0, Windows Vista SP1
IBM ThinkPad T61p, T7800, FX570M, 4 gigs of RAM

http://designsmarter.typepad.com/solidmuse

http://www.phxswug.com

 

[drawoh]

EngAP,

Insert
...Model Items...

JHG

 

[drawoh]

EngAP,

My suggestion above dimensions everything except the wizard hole.

Look for an icon that consists of a centrebore symbol and a diameter symbol. This dimensions all the hole wizard features.

JHG

 

[EngAP]

AnnaWood - yes, the drawing rather than the sketch.
drawoh - yes, that is how I tend to do it for all other dimensions however I could not get it to work for hole wizard holes.

However I have found the answer. I re-created the holes by pre-selecting the face before clicking drawing wizard and now I can automatically dimension as per all other dimensions. Before I was post-selecting the face.

Thanks.