Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
dimensioning counterbore and csk holes with all parameters
- Thread starter catsol
- Start date
Hi, catsol!
You can make a "Text Template", wich will contain any information you need (including all that you listed), and then assign the template to holes using "Text Template Placement". There are videos on youtube wich show how to do that.
The only inconvinience is that you have to mark each hole manually.
Best regards
You can make a "Text Template", wich will contain any information you need (including all that you listed), and then assign the template to holes using "Text Template Placement". There are videos on youtube wich show how to do that.
The only inconvinience is that you have to mark each hole manually.
Best regards
- Status
Similar threads
