Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dimensional specs on 28" pipe

Status
Not open for further replies.
cfee

cfee

Industrial
Joined
Apr 22, 2002
Messages
491
Location
US
I'm looking for the dimensional specs on 28" pipe. Specifically, I need the bore (I.D.) of 28" SCH-40s (STD) pipe. Any ideas?
Tks all-
C. Fee
 
Sort by date Sort by votes
My Mechanical Engineering Handbook gives the I.D. of standard weight 28" steel pipe as 27.250" (wall thickness = 0.375"), but doesn't show this as Schedule 40. There is no Schedule 40 listed for 28" dia.
 
Upvote 0 Downvote
Maury & PiperAnton -
BIG thanks !
C. Fee
 
Upvote 0 Downvote
My Machinery Handbook shows for:
24" 22.624"ID .688"wall
32" 30.624"ID .688"wall
Properties of American National Standard Schedule 40 Welded and Seamless Wrought Steel Pipe
hth
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

G
  • Question Question
Question about mask on Draftsight
Replies
0
Views
1K
gpaiva
G
CAD2015
  • Question Question
Dimension tangent snap point on geometry ............................
Replies
4
Views
6K
Sparweb
Sparweb
jafary64
  • Question Question
LSP for edit multiple blocks (color) at once in AutoCAD
Replies
7
Views
10K
CarlB
CarlB
Hamidreza1973
  • Locked
  • Question Question
execute the Mview command more than one time
Replies
0
Views
381
Hamidreza1973
Hamidreza1973
O
AutoCAD won't work on cloned drive. Workarounds?
Replies
0
Views
2K
OctavioMasomenos
O

Part and Inventory Search

Sponsor

Back
Top