Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dimension standard problem in valve bonnet gasket

Status
Not open for further replies.
yldrmkara

yldrmkara

Mechanical
Joined
May 5, 2019
Messages
12
Location
TR
When we want to change the gaskets on valve bonnets, I encounter different dimensions for each brand. Is there a dimension standard for bonnet gaskets in this sector? Or does anyone have experience on this subject?
 
Sort by date Sort by votes
No body-bonnet gaskets are left to the manufacture. sometimes it might be coincidence one lines up with a standard size but in general they are custom per manufacture.
 
Upvote 1 Downvote
Status
Not open for further replies.

Similar threads

Danlap
  • Question Question
Pinhole above bonnet - HF service
Replies
2
Views
494
Danlap
Danlap
S
  • Locked
  • Question Question
API 6A standard 10000psi ball valve material selection
Replies
4
Views
2K
Sean_Wei
S
T
  • Locked
  • Question Question
Flowrate in a valve
Replies
4
Views
3K
Snickster
Snickster
A
  • Question Question
Use of Gate Valve for Throttling
Replies
9
Views
7K
ASA2025
A
trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar

Part and Inventory Search

Sponsor

Back
Top