Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dimension question

  • Thread starter Thread starter J.Smith
  • Start date Start date
Status
Not open for further replies.
J

J.Smith

Guest
I'm pretty new to NX so this might be a simple question, but in drafting how to you dimension from a flat to the furthest point of a curved surface?
 
First you have to create a minimum line using Analyse>Distance. and then you can create a dimension to the end point of it.

Ananth Kulkarni
Sr.Design Engineer
Sri Lanka
 
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question Question
Dimension representation.....
Replies
4
Views
3K
ghostdigital
ghostdigital
CAD2015
  • Locked
  • Question Question
NX Sketch dimension.....
Replies
2
Views
2K
CAD2015
CAD2015
CAD2015
  • Question Question
Sketch dimension shown on drawing..............
Replies
2
Views
3K
CAD2015
CAD2015
hmichel
  • Question Question
NX2312 Sketcher and Drafting - Approximate Dimension Symbol
Replies
7
Views
4K
SDETERS
SDETERS
CAD2015
  • Locked
  • Question Question
NX 2212 - Drawing dimension text management....
Replies
2
Views
2K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top