Sep 19, 2014 #1 ArpEng Mechanical Joined Sep 17, 2014 Messages 5 Location IN Dear All Gents; Keeping All Design Criteria Same, Why Differents D'Ends have differents Thickness ? any theoretical Explanation ?
Dear All Gents; Keeping All Design Criteria Same, Why Differents D'Ends have differents Thickness ? any theoretical Explanation ?
Sep 19, 2014 #2 doct9960 Mechanical Joined Aug 15, 2006 Messages 618 Location CA For vertical vessels, this could be due to the weight of the vessel, static head, wind/seismic loads, etc. Upvote 0 Downvote
For vertical vessels, this could be due to the weight of the vessel, static head, wind/seismic loads, etc.
Sep 19, 2014 Thread starter #3 ArpEng Mechanical Joined Sep 17, 2014 Messages 5 Location IN I'm talking about only D'Ends .. Upvote 0 Downvote
Sep 20, 2014 #4 lmacallndong Specifier/Regulator Joined Feb 25, 2012 Messages 14 Location CA Arpeng What are dends? Upvote 0 Downvote
Sep 20, 2014 #5 chicopee Mechanical Joined Feb 15, 2003 Messages 6,199 Location US That's what I would like to know, what are D'ends? Upvote 0 Downvote
Oct 2, 2014 #6 GenB Mechanical Joined Oct 24, 2003 Messages 1,362 Location US Think the designer is an artist, it can be designed as wish as long as it complies with the Code of construction. Upvote 0 Downvote
Think the designer is an artist, it can be designed as wish as long as it complies with the Code of construction.