Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
different between ASME Sec.I and Sec.VIII
- Thread starter morojlu
- Start date
In a nutshell, Section I deals with "construction of power boilers, electric boilers, miniature boilers, and high temperature water boilers to be used in stationary service and includes those power boilers used in locomotive, portable and traction service". Please read the Introduction for specific definitions for power boilers....
For ASME Section VIII, read the Scope U-1 (a)(2) "for pressure vessels that are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from a direct or indirect source, or combination thereof."
For ASME Section VIII, read the Scope U-1 (a)(2) "for pressure vessels that are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from a direct or indirect source, or combination thereof."
- Status
Similar threads
- Question
- Locked
- Question
- Question