Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Difference between NX 7.5 and NX 8.0/8.5 1
- Thread starter CAD2015
- Start date
-
1
- #2
JohnRBaker
Mechanical
With NX open, go to...
Help -> What's New Guide...
...and you'll find a document showing all of the enhancements made to that version of NX. Note that if you're running NX 8.5, this will only cover the enhancements for NX 8.5. So if you're looking for the NX 8.0 enhancements as well you'll need to see if they've also installed NX 8.0 and if so, you can find a copy of the NX 8.0 'What's New Guide' there.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
Help -> What's New Guide...
...and you'll find a document showing all of the enhancements made to that version of NX. Note that if you're running NX 8.5, this will only cover the enhancements for NX 8.5. So if you're looking for the NX 8.0 enhancements as well you'll need to see if they've also installed NX 8.0 and if so, you can find a copy of the NX 8.0 'What's New Guide' there.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #3
You need a webkey to login but once that is done, What's new guides from NX1 onward.
Regards,
Tomas
Regards,
Tomas
- Status
