Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DFLUX subroutine with multi-scane laser heat source in ABAQUS?

Status
Not open for further replies.
Qasim Zafar

Qasim Zafar

Mechanical
Joined
Sep 24, 2018
Messages
11
Location
PK
I am using DFLUX subroutine in ABAQUS for moving laser heat source in AM simulation. One track is successfully simulated with heat source but when ever I tried for multi track with TIME(2) it does not work. Need urgent guidance. Thank you
 
Status
Not open for further replies.

Similar threads

zidane.imade
  • Locked
UMAT subroutine for SMA
Replies
3
Views
4K
IceBreakerSours
IceBreakerSours
swahlgren
  • Locked
  • Question Question
Abaqus 2025 installation files
Replies
2
Views
2K
FEA way
FEA way
T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
375
SWComposites
SWComposites
A
  • Question Question
Problem fusing cone with curved geometry in Salomé-Méca (GEOM module)
Replies
0
Views
6K
Aliénor
A
AACING
  • Locked
  • Question Question
Methods to add rotation dof to solid with ABAQUS, MSC NASTRAN and SAMCEF
Replies
3
Views
2K
GVDR
G

Part and Inventory Search

Sponsor

Back
Top