Sep 5, 2002 #1 Guest Is it possible to design the slab as beam? I mean by concentrating steel/tendons over certain width of slab and design it as beam.
Is it possible to design the slab as beam? I mean by concentrating steel/tendons over certain width of slab and design it as beam.
Sep 5, 2002 #2 JAE Structural Jun 27, 2000 15,611 Yes, I've done that before. Just be careful with your service load deflections. Span to depth ratios given in ACI (or whatever concrete code you use) should be followed. Upvote 0 Downvote
Yes, I've done that before. Just be careful with your service load deflections. Span to depth ratios given in ACI (or whatever concrete code you use) should be followed.
