Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design Tee and Barred Tee Datasheet

Status
Not open for further replies.

brvs2014

Mechanical
Joined
May 15, 2017
Messages
33
Location
EC
I am designing a tee barred but I do not find the dimensions of bicelado and chamflan to design the Tee and then proceed with the details of the welded bars, I would be very grateful to help me with some catalog or datasheet
 
excuse my stupidity, what is barred, bicelado and chamflan?
Do you mean tees used in pigginglines?
 
bars, like a jail cell, for blocking a pig or sphere from taking a turn into the outlet of the tee.

Technology is stealing American jobs. Stop visas for robots.
 
bevel and chamfer according to google translate.

Still doesn't make a lot of sense.

I wouldn't bother - just say barred tee and then look at the design provided.

~you really want something like this

barred_tee_y4t7sp.jpg


There are also versions where you weld the bars into a short section of the branch and then weld that onto the tee because the welding of the bars is then a lot easier.

Welding of the bars - really flat strips - is quite difficult to do and QA/testing is notoriously difficult.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
"I am designing a barred tee" probably means he has to bother with it.
Good you gave him the std dwg.

I've used round bars instead of those flat bars you've got there.

Technology is stealing American jobs. Stop visas for robots.
 
LittleInch :

Correct that is what I am looking for.

regards
 
No.

Right click, save picture wherever you like.

Technology is stealing American jobs. Stop visas for robots.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top