Design Table for Hole Wizard

[Pachem]

Is it possible to change hole (dia & callout) in the Hole Wizard (for example from 1/2-13 to 5/8-11) using Design Table (Excel) or API?

 

[brengine]

API...yes.

Design Table...No, not that I know of.

Ken

 

[CorBlimeyLimey]

A DT can be used to change the holes dimensions, but not the holes feature name or callout.

You could however have multiple holes at the same position and have the DT suppress & unsuppress them as required.

​

Helpful SW websites faq559-520​

How to find answers ... faq559-1091​

SW2006-SP5 Basic ... No PDM​

 

[SBaugh]

Hole Calloutformat.txt file can be customized as well, but under those items you listed.

Regards,



Scott Baugh, CSWP

http://www.scottjbaugh.com

faq731-376