Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design of Scupper Drain for Swimming Pool

Status
Not open for further replies.
Replies continue below

Recommended for you

Not sure what your question is. Perhaps you can elaborate.
 
The few scupper drains with which I am familiar have removable plates in the deck proper so that with the plate removed, a suction hose can be easily inserted through the deck, through the scupper channel, and into the scupper drain, for vacuuming the pool.

The scupper drain and the bottom drain are also valved independently at the filter so the pump suction can be routed to either one or both.

That's pretty much all I know about pool plumbing. It sounds like you need a more comprehensive and authoritative source, like a book, real soon.



Mike Halloran
Pembroke Pines, FL, USA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor