Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design of Headed Anchor Bolts

Status
Not open for further replies.
ars001

ars001

Structural
Joined
Aug 21, 2006
Messages
83
Location
US
Can anybody lead me to a good reference for design of headed anchor bolts in reinforced concrete piers? Thank you.
 
Sort by date Sort by votes
PCA notes on ACI318.

Never, but never question engineer's judgement
 
Upvote 0 Downvote
ACI Appendix D, its all in there.
 
Upvote 0 Downvote
KBVT- My loads are much greater than what I can accomplish with an unreinforced concrete. I need to transfer my loads from my anchor bolts into my steel change of my concrete pier.
 
Upvote 0 Downvote
In Appendix D of ACI 318-05 there is little guidance with respect to dealing with supplementary reinforcement (strength provided by shear friction)

318-08 will have guidance on this. It's worth getting 318-08 just for that section.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Eng_Struct
  • Locked
  • Question Question
Column Base Plate Anchor Bolts
Replies
7
Views
5K
icebloom
icebloom
Eng_Struct
  • Locked
  • Question Question
Bent Anchor Bolts With Column & Framing Installed
Replies
1
Views
2K
ANE91
ANE91
kevin555582
  • Question Question
Concrete Anchor Design in Top of Wall at Corner
Replies
1
Views
3K
Rsd789
Rsd789
B
  • Locked
  • Question Question
Aluminum anchor bolts and aluminum pans
Replies
4
Views
2K
dik
dik
StrEng007
  • Locked
  • Question Question
Sill plate anchor bolts
Replies
7
Views
2K
StrEng007
StrEng007

Part and Inventory Search

Sponsor

Back
Top