Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design of base plate for truss column with internal bolts

Status
Not open for further replies.
Sort by date Sort by votes
If the column load is just axial compression, there is no force in the bolts. Just provide 4 bolts for erection stability.
 
Upvote 0 Downvote
Thank you for the response. The joint is subjected to both compressive and shear forces. Could you please indicate the procedure for calculating the thickness of the base plate and the diameter of the anchor bolts?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Eng_Struct
  • Locked
  • Question Question
Column Base Plate Anchor Bolts
Replies
7
Views
5K
icebloom
icebloom
O
  • Question Question
Rectangular HSS Column/Round Base Plate Design
Replies
9
Views
6K
Tomfh
Tomfh
M_U
  • Question Question
Anchor configuration for base plate design for considering supplementary reinforcement as per Euro code.
Replies
5
Views
4K
HTURKAK
HTURKAK
palk7 EIT
  • Question Question
Gusset Base Plate design at brace location
Replies
5
Views
15K
palk7 EIT
palk7 EIT
sticksandtriangles
  • Question Question
Internal Gusset Plate Forces
Replies
3
Views
8K
Deker
Deker

Part and Inventory Search

Sponsor

Back
Top