Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design code for tower cranes

Status
Not open for further replies.

LeoOffshores

Structural
Joined
Mar 5, 2011
Messages
4
I wonder what are the codes to design (structral) tower cranes.
Does CSA Z248-04, have a complete formulation to do this?
I also took a look at DIN 15018 but it is too old.
Thanks.
 
CAN/CSA-Z248-04 Applies to the design, characteristics, construction, installation, dismantling, operation, inspection, testing, and maintenance of tower cranes.
 
Boo, do you know if Z248-04 has the formulas to check structrual strength of the elements of the tower crane?
 
I recently did an analysis for Oil Derrick stuctural work, they call out API 4F if I remember correctly. Might be a starting point.

Kenneth J Hueston, PEng
Principal
Sturni-Hueston Engineering Inc
Edmonton, Alberta Canada
 
Do you have a copy of Shapiro"Cranes and Derricks"?;there should be an answer in that book as there is a whole section on tower cranes.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top