Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Delta PLC with Powerflex 525

Thread starter ttn121
Start date May 30, 2022

Status: Not open for further replies.

May 30, 2022

ttn121

Student

Hello I’m trying to control Powerflex 525 with a Delta AS series PLC, I’m using explicit messaging methode, I can read data from Powerflex for example nominal voltage etc, but I can not write or set new value to some parameters for example : ” Commanded Freq b002 ” and ” Drive Status b006 “. If anyone could help with this problem I would really appreciate it. Here are some photos of an example of the code!

https://drive.google.com/drive/folders/1F6oPVHIDaomyJT383n-Rh-UiplrSeLjF?usp=sharing

Thank you in advance!