Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dell Inspiron 8000 with ME

Status
Not open for further replies.
scarg

scarg

Industrial
Joined
Dec 14, 2001
Messages
25
I recently went through a wonderful experience of trying to install NT 4.0 on my laptop. It was less than fun. Video drivers and other needed items were unobtainable no matter where we looked. Is it possible to run PRO/E on a laptop with Windows ME? I know that most people laugh at ME as an operating system, but I has used everything from UNIX to the opposite end of the spectrum and don't have problems running ME on my machine. I have heard that there are security problems with ME. But that is not a major concern. Any feedback would be appreciated.

Steve
 
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question Question
with lookup_inst function variants change family table via parameters
Replies
1
Views
2K
3DDave
3DDave
whatev-nvm
  • Locked
  • Question Question
OBJ of a simp rep of an assembly gets exported with incorrect coordinate system
Replies
0
Views
1K
whatev-nvm
whatev-nvm
M
need help with COG in creo
Replies
0
Views
7K
Mango_5
M
F
belt mechanism conflicts with slot connection and servo motor
Replies
0
Views
2K
fisa
F
JDP_CAD
  • Locked
  • Question Question
Public geometry issue with Creo8
Replies
2
Views
399
JDP_CAD
JDP_CAD

Part and Inventory Search

Sponsor

Back
Top