Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Public geometry issue with Creo8

Status
Not open for further replies.

JDP_CAD

Mechanical
Joined
May 4, 2022
Messages
2
Location
NL
Hello,
We have been using public geometry in an assembly for several years (creo5) and within this public geometry there is a composed surface (bottle), which we use to hollow out another part (mould). The usefulness of public geometry is that we change the bottle to another and the mould automatically updates itself (height, diameter etc) to match the new bottle.
However, since we have been testing Creo 8, we have not been able to change our bottle without causing an error: it does not replace the old composed surface with the new one.
I am trying to attach a video to show you our problem.
Maybe we have done it wrong for a long time, but our files are like that. If we have done it wrong, what should we do?
Thank you in advance for your interest in my question.

Regards
 
 https://files.engineering.com/getfile.aspx?folder=db5c237a-2cb0-497f-a957-0a5768f54599&file=pb_remplacement_prt2.avi
Hello !
I try, I try [sad]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top