Feb 15, 2016 #1 4Boomers Structural Mar 29, 2011 12 Is the panel point dead load the same at the top and bottom chord due to a point load placed along the vertical member at a location other than mid Height?
Is the panel point dead load the same at the top and bottom chord due to a point load placed along the vertical member at a location other than mid Height?
Feb 15, 2016 #2 mike20793 Structural Jun 26, 2014 680 Can you do the method of joints to figure out the load on the bottom chord? Upvote 0 Downvote
