Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Debonding of Concrete-FRP interface in abaqus

Status
Not open for further replies.
michaelchqwva

michaelchqwva

Civil/Environmental
Joined
Nov 5, 2011
Messages
2
Location
ZA
Hi All

May anyone help me with modelling debonding using cohesive elements in abaqus. I am building a 2D model of a reinforced concrete beam strengthened withexternally bonded FRP. I have used cohesive elements for modelling the adhesive interface between the concrete and the FRP. My model is running but I cannot see the debonding. Please help...Your help will be greatly appreciated.

 
Status
Not open for further replies.

Similar threads

swahlgren
  • Locked
  • Question Question
Abaqus 2025 installation files
Replies
2
Views
2K
FEA way
FEA way
compe_ad
  • Locked
  • Question Question
Concrete failure point in Abaqus
Replies
4
Views
862
compe_ad
compe_ad
Kamyar_K
  • Locked
  • Question Question
Changing the slip interface by loading rate
Replies
0
Views
374
Kamyar_K
Kamyar_K
joesm519
  • Locked
  • Question Question
Equivalent of "Measures" of Creo Simulate in Autodesk Nastran
Replies
0
Views
812
joesm519
joesm519
N
  • Locked
  • Question Question
MSC NASTRAN for ABAQUS CAE
Replies
4
Views
4K
dmapguru
dmapguru

Part and Inventory Search

Sponsor

Back
Top