Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DC to DC converter

Status
Not open for further replies.

Waltcolorado

Electrical
Joined
Dec 2, 2003
Messages
3
Location
US
I need to design a DC to DC converter which inputs 14 to 17 volts DC and outputs 23 volts at up to 400 ma.

Ive found a couple solutions which come sort of close but they generally look like they might be a little weak power handling. One is based on the MC34063A IC and it might possibly work and the other is the LM1577 but it only goes up to 15 volts.

Low cost is extremely important.

I would greatly appreciate if someone can steer me towards an IC part number and I can take it from there - any advice is appreciated.

Thanks,

W.H.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top