Datum Features on Unblanked Layers in Pro/E WildFire2

[tduong]

Hello all,

I ran the analysis/modelcheck/modelchek regenerate in ProE Wildfire2 for an assembly package and got the message such as "Datum Features on Unblanked Layers".

Please help.

Thanks,

 

[sarvar]

I think you have some of the datam features are in the unblanked layers. You blank those layers and re-run the check youw ill not get this message.

If I understood correctlly it is not the critcal message. You can ignore if you want.

Thanks