Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Datum Feature Simulator Question

Status
Not open for further replies.
pmarc

pmarc

Mechanical
Joined
Sep 2, 2008
Messages
3,248
Guys,
Short question: Fig. 4-18 in Y14.5-2009. How would datum feature simulator C look like if there was no reference to A in positional FCF for 8.2 - 8.4 slot? Any difference to what 4-18 is currently showing? Thanks a lot.
 
Sort by date Sort by votes
Any difference to what 4-18 is currently showing? Thanks a lot.
Click to expand...

No difference in C... but B would be diameter 12.1 rather than 12
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Diametrix
  • Question Question
Hex hole as a datum feature
2
Replies
21
Views
22K
Burunduk
Burunduk
SeasonLee
  • Question Question
Datum callout question
2 3 4
Replies
75
Views
14K
mfgenggear
mfgenggear
tN.gineer
  • Question Question
Cylindrical feature, datum symbol placement, in line vs not in line with dimension arrow
Replies
15
Views
11K
Burunduk
Burunduk
Viper555
  • Question Question
Datum shift
Replies
8
Views
13K
3DDave
3DDave
CTengIS
  • Locked
  • Question Question
Irregular Feature Of Size as Datum Feature on CMM
2
Replies
20
Views
9K
CTengIS
CTengIS

Part and Inventory Search

Sponsor

Back
Top