HalimWardag
Civil/Environmental
Who can tell me how to define Damper between two points in SAP2000 v14.
Thanks for your help
Thanks for your help
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Damper Element inSAp2000 V14
- Thread starter HalimWardag
- Start date
- Status
- Thread starter
- #2
HalimWardag
Civil/Environmental
AH!
I learned by myself, may be important for others,
Go to Draw Mi> click on Draw 2 joint link, then you can define its properties, from Define Min> Section properties > link/support properties.
Hope it help you
I learned by myself, may be important for others,
Go to Draw Mi> click on Draw 2 joint link, then you can define its properties, from Define Min> Section properties > link/support properties.
Hope it help you
- Status
Similar threads
- Locked
- Question
- Locked
- Question