Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

cyclic symetry in ansys.

Status
Not open for further replies.
analysis

analysis

Aerospace
Joined
Apr 27, 2001
Messages
2
Location
IN
i,m finding difficulty in using /expand command for a turbine sector , which was modeled in ideas and exported to ansys. help me try fix the problem in display coordinates system.
m.saravanakumar
anna university , chennai
 
Status
Not open for further replies.

Similar threads

YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
raslraslov
  • Locked
  • Question Question
Setting up units in nCode when importing d3plot (ANSYS)
Replies
0
Views
559
raslraslov
raslraslov
Sparky4598
  • Locked
  • Question Question
Materials database for Ansys mechanical
Replies
2
Views
498
Sparky4598
Sparky4598
raslraslov
  • Locked
  • Question Question
nCode Designlife Materials and LS-Dyna d3plot (ANSYS)
Replies
0
Views
585
raslraslov
raslraslov

Part and Inventory Search

Sponsor

Back
Top