Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cutting Stainless on a Amada FO-3015

Status
Not open for further replies.
npwill06q

npwill06q

Industrial
Joined
Jan 14, 2014
Messages
3
Location
US
I've been having some trouble cutting stainless, it cuts through just leave a nasty burr on the outside. could my settings be off?

I'm pretty new at this so if I'm not being clear let me know. Currently cutting 3/8 stainless.
 
Sort by date Sort by votes
Focus. If you have a NT machine its different. I would say just keep moving it down 0.040". Keep doing that till you loose the cut. Then come back up 0.040"
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

PMT2024
  • Locked
  • Question Question
AMADA FO 3015 -B INTERLOCK
Replies
1
Views
590
LASERNINJA
LASERNINJA
D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
Richardwen
  • Locked
  • Question Question
Amada FO-3015 - Alarm 2154 - sensing alarm
Replies
1
Views
375
LASERNINJA
LASERNINJA
M
  • Locked
  • Question Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
jjl1210
  • Locked
  • Question Question
Amada FO4020NT
Replies
4
Views
1K
LEIPRABA
LEIPRABA

Part and Inventory Search

Sponsor

Back
Top