Richardwen
Mechanical
- Aug 6, 2023
- 1
Hello
I am having a problem with my 7.5“ lense I am getting a 2154 sensing alarm and it will cut about an inch and then it will start sensing and moves up and alarms out. When I turn the shutter key off it it will trace the outline as soon as I turn it on it cuts an inch and alarms out.
I switched to a 5“ lense to see if it will cut thinner material we ran a test cut on same 14GA and it cuts beautiful.
Any ideas what may cause this?
Thank you!
I am having a problem with my 7.5“ lense I am getting a 2154 sensing alarm and it will cut about an inch and then it will start sensing and moves up and alarms out. When I turn the shutter key off it it will trace the outline as soon as I turn it on it cuts an inch and alarms out.
I switched to a 5“ lense to see if it will cut thinner material we ran a test cut on same 14GA and it cuts beautiful.
Any ideas what may cause this?
Thank you!