Cutting bronze question

[burnsie1990]

We have a new Bystronic ByStar 4400w laser. A local bronze foundry is wanting us to cut some bronze for them at 3/16 in thick. Can someone give me some insight on doing this?
Thank you,
Kevin
design@wallowa.us

 

[jeffday]

Kevin,

Have you spoken with Bystronic applications? I was just speaking with the Applications Manager and he said they should be able to help you out. Please call them at 800-247-3332.

Regards,
Jeff Day
Regional Sales Manager, Bystronic Inc.
----------------------------------
Bystronic Inc.
185 Commerce Drive, Hauppauge, NY 11788
Phone 440-243-4856, Cell 216-533-9142, Fax 440-239-1875
jeffday@mycingular.blackberry.net;

http://www.bystronic.com

 

[burnsie1990]

I would like to hear from some real World people on this also.
Thank you,
Kevin

 

[ScottI2R]

burnsie1990,
I do not have any experience with bronze but I have learned to trust the Apps Engineers at the manufacturers. After all, they , in most cases, do the demos that provide acceptible results that result in the sale of the product.

Hope this helps,

Scott


In a hundred years, it isn't going to matter anyway.