Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

amada cutting laser

Status
Not open for further replies.
Majidtaherkazemi

Majidtaherkazemi

Electrical
Joined
May 28, 2023
Messages
1
Location
US
I have a problem with the following machine :
AMADA LCE-645
the machine works perfectly but during cutting process it stops to cut and alarm no.676 appears .
would you please help me to find the cause of this trouble and remedy it ?
regards
 
Status
Not open for further replies.

Similar threads

D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
M
  • Locked
  • Question Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
S
  • Locked
  • Question Question
LD1 Alarm Amada 6kW Fiber Laser
Replies
0
Views
1K
SiemensN00b
S
B
  • Question Question
Will there be problems with the cutting section if the laser cutting speed is too fast or too slow?
Replies
3
Views
554
IRstuff
IRstuff
B
  • Question Question
how to laser cut a cylinder
Replies
0
Views
5K
Bluces
B

Part and Inventory Search

Sponsor

Back
Top