Current ASME revision

[letsbeginnow]

Can anyone tell me what's the current revision of ASME, ASTM and MSS SP design standards?
I understand different standards were revised at different point of time but I'm not sure if standards I'm referring to now are of latest revision or old one's.
Thanks in advance.
Shashi

 

[TGS4]

You're referring to literally hundreds of Standards.

Go the the ASME website, the ASTM website, for starters, and look it up yourself.

 

[AllHandlesTaken]

An easy way is to do a search on the TechStreet website:

http://www.techstreet.com

The results will tell you if there any ammendments, if the year has been updated, ...........

 

[SnTMan]

Well it won't be easy if you don't know which standards you are after...

Regards,

Mike

 

[letsbeginnow]

Thanks for referring to techstreet.com. That was helpful to figure out specific standards that are revised based on update year

 

[DSB123]

letbeginnow,
If you are working for a reputable Company who has a Quality Department then revert to them. Any Quality department worth its salt should have a system to check and update (and let the engineering staff know) standards when they are issued and ammended. After all using up-to-date standards should be within the Quality remit of any Company.

 

[KENAT]

Good one DSB123

KENAT,

Have you reminded yourself of faq731-376 recently, or taken a look at posting policies:

http://eng-tips.com/market.cfm?

What is Engineering anyway: faq1088-1484