Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
cure check for epem compound
- Thread starter dunlopman
- Start date
- Thread starter
- #2
French copper cure test - I have two(2) lab ovens and using oven A the results from the cure test or OK however using Oven B the same profile sample sometimes show "dark" indicating the profile is not completely cured / or there is sulfar still present?
Ltormento1
Chemical
In a first moment you need to check if the temperature profile are the same on the ovens, without this information is very difficult to give your a feedback and solution.
- Status
Similar threads
- Locked
- Question