Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CSA gr. 359 flanges in lieu of ASME A350 Flanges

Status
Not open for further replies.
jskernahan

jskernahan

Mechanical
Jun 27, 2012
15
Hi Guys,

Does anyone know if you can use CSA gr. 359 flanges in lieu of ASME A350 Flanges in a B31.3 piping system? I'm not sure if B31.3 will recognize the gr. 359 material. Thanks,

James
 
Status
Not open for further replies.

Similar threads

swearingen
  • Question
Can Standard Flanges Resist Full Bending Strength of Pipe?
Replies
7
Views
3K
swearingen
swearingen
Shahpar
  • Question
Ring Joint Flanges for 38 inch and larger size as per ASME B16.47 Series A
Replies
1
Views
3K
GD2
GD2
KevinNZ
  • Locked
  • Question
Ordering socket weld flanges 1
Replies
11
Views
882
LittleInch
LittleInch
Ahmed Mohamed
  • Locked
  • Question
Wafer check valve with half groove threaded holes of both flanges 1
Replies
11
Views
476
LittleInch
LittleInch
Xk333
  • Locked
  • Question
Slip on flanges for normal fluid services
2
Replies
26
Views
1K
XL83NL
XL83NL

Part and Inventory Search

Sponsor

Back
Top Bottom