Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Crop view

Status
Not open for further replies.

Coboco

Industrial
Joined
Feb 14, 2007
Messages
6
Location
YU
Is it possible to crop view in drawig... in INV11?
 
What do you mean by 'crop view'? You only want to show part of it?
 
yes only the part of it... not all part
 
Create the view on a second sheet. Then, create a 'Detail View' of the area you want to show (turn off the labels for the view.) Once you have the area showing what you want, drag the the view in the tree up to the 1st page.

Also, edit the 2nd sheet and exclude from count & printing.
 
that is exactly what I did... but unfortunatly there is no better way, I guess :(
 
You could also make a view representation in your part/assmbly. Then when you insert the view you can select that representation and it'll display the same. If the part/assembly needs to be sectioned, then you could 'Slice' the part.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top