Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

creep analysis

Status
Not open for further replies.
alxlong

alxlong

Mechanical
Joined
Jan 3, 2003
Messages
1
Location
IT
I want to determine the stress/displacement of a plastic part under constant load after 100000 hrs. Is right to consider the problem as a stationary problem with nonlinear stress/strain relationship using isochronous curve at 100000 hrs or does the fully time creep integration ( with a power law ) give different results ?
Thank in advance
Alex
 
Status
Not open for further replies.

Similar threads

Stress_Eng
  • Locked
  • Question Question
FEM Contact Analysis Variables
Replies
17
Views
14K
Stress_Eng
Stress_Eng
G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
400
SWComposites
SWComposites
mohamed hassan 2014
  • Locked
  • Question Question
Nonlinear analysis using HyperMesh with OptiStruct
Replies
0
Views
642
mohamed hassan 2014
mohamed hassan 2014

Part and Inventory Search

Sponsor

Back
Top