Creating parting line..

[sk258013]

Hi all

I have imported IGES file and created A B & C surfaces and made a solid part,

now i want to create parting line how can i do that?

please help me

Thanks

I am in learning ZONE

 

[NutAce]

Can you explain a bit more in detail? Maybe a picture of the desired result? What do you mean with parting line?
Also please state which version of NX you are using....

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[ranjithbelur]

If it is a simple part, then orient the model normal to the pulling direction and use precise outline option in extract curve.

 

[NXsupport]

HI ,

I will use Mold Part Validation wizard and extract the parting lines.. Its easier..

 

[Rob_N]

If you don't have a mold wizard license, orient the part in the top view of how you want to separate it, shade it then the use extract curve, Silhouette Curve and/or precise outline curve