Creating notes of analysis results

[SW]

I have created an analysis feature to calculate a model mass and while I can use the feature in a relation, for example d2=mass:fid_analysis1, how do I get the value of the analysis feature to display in a note?



Thanks,



Sam

 

[mmead0ws]

Create a note and enter '&mass:fid_analysis1' for 2001 and Wildfire (maybe 2000i2). Earlier versions must use the number of the feature ID.



I just did this as a 3D note. But it should work as a drawing note also.

 

[SW]

Thanks for the help, problem solved



Sam