create a part from an assembly

[ryandias]

i know you can do it, and i forgot how.... :-(

 

[fredericmenage]

- Open the asm
- click the tab 'parts library' in the edge bar
- at the top left, click 'create in place'

HTH

Fred

 

[SLemin]

Or if you're trying to make an entire assembly just one part, then open a new part and click 'insert' 'insert part copy'. Then navigate to the assembly.

 

[KENAT]

Or if you are trying to make a part from an assy there is functionality within simplified assemblies to support this.