cosmetic threads disapearing

[MagnetsDA]

I have a drawing that is loosing the cosmetic threads on some holes. I used the hole wizard to make the holes. Later I added another point in the sketch (to add another hole). Originally the cosmetic threads showed on the drawings. Now I go back into the drawing and one of the three holes does not show a cosmetic thread. I can highlight the cosmetic thread in the feature manager tree and it shows, but will not stay. If I right click on it, it gives the option to hide (not show). How can I get the threads to show and stay showing?

 

[SBaugh]

Have you checked your Display Annotatiosn in FM to make sure that's it's set on?

Regards,

Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376
faq559-716 - SW Fora Users

 

[MagnetsDA]

The display annotations in the FM is on. I just got some other advice to insert model items-cosmetic threads. I tried this and it worked. No reason given as to why they disapeared in the first place.

I think I am all set for now. Thanks Scott.

 

[Drhinehart]

Could you please post what you did to fix the problem? We are having the same issues of cosmetic threads disappearing...

Thanks

 

[SBaugh]

I just got some other advice to insert model items-cosmetic threads

There is the answer "insert\Model Items\Cosmetic thread"

Regards,

Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376
faq559-716 - SW Fora Users